Hague HCST Camslide Traveller Camera Slider 0.5m

MSRP: £132.00
£66.00
(Inc. Tax)
MSRP: £110.00
£55.00
(Ex. Tax)
(You save £66.00 )
(No reviews yet) Write a Review
SKU:
HCST
UPC:
0702795786267
Shipping:
Calculated at Checkout

The Camslide Traveller camera slider from Hague Camera Supports is small, compact and lightweight making it ideal for people on the move. It produces very smooth slider tracking shots and is an ideal DSLR slider or video camera slider for people who want a compact and portable system.

It is half a metre (500mm) in length which gives a good amount of slide if you think how long your shot is actually likely to be on screen for. The camera can either be mounted directly to the sliders carriage or it can have a ball head or video head mounted so the camera postion can be adjusted accordingly. 

Get a cool shoulder support for just £15.00 ex vat and utilise this slider as a shoulder rig too!! See the Hague CTSS Shoulder Support listed as a related product below.

HAGUE CAMERA SUPPORTS PRODUCT DESCRIPTION

The Hague Camslide Traveller is quick and simple to set up, it can be mounted to the video head of any sturdy tripod or placed on a table or the floor for low shots. The camera fastens directly to the carriage, or an optional Ball Levelling Head can be used between the camera and carriage, this enables the camera angle to be adjusted when used on a table or the floor.

The usual ideal set up is to mount the track onto the video head of the tripod and the camera onto the carriage. The tripod can then be used in the usual way for pan and tilt with the extra feature of being able to create smooth tracking shots with the Camslide Traveller.


The track has a tripod mounting plate in the centre, with mounting holes for both 1/4" and 3/8" screws, plus a locating hole for the pin found on most tripod camera plates.

Two track supports are also supplied, one for each end of the track, which support the Camslide track when it is used on a table or the floor and also prevent the carriage from coming off the end of the track.



The Carriage has a 1/4" camera screw to mount the camera to the carriage, or an optional Quick Release Adapter could be used, making it simpler and quicker to mount the camera on & off the carriage. A thumb screw on the side of the carriage locks the carriage to the track when used in a fixed position.

Once the camera is mounted onto the carriage you can create supper smooth tracking shots as you slide the carriage down the track. The track is 500mm ( 19.5" ) long giving a maximum camera movement of 400mm ( 15.5 " ). Suitable for all camcorders and cameras up to 3.5kg.

The double rail track is made from hard anodized aluminium and the carriage has low wear, low friction bearings that do not require lubrication. It is resistant to dirt and dust.

Track:- Length 500mm. Width 50mm. End Supports:- Width 205 x 38mm. Carriage:- Length 100mm. Width 72mm. Total Weight:- 1.125kg.