Skip to main content

Hague Multi-Mount System Kit 2

Hague Camera Supports

£690.00 (Inc. Tax)
£575.00 (Ex. Tax)
(No reviews yet) Write a Review
SKU:
MMS2
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

HAGUE MULTI-MOUNT SYSTEM KIT 2

THE FOLLOWING ITEMS ARE INCLUDED IN THE HAGUE MULTI-MOUNT SYSTEM KIT 2

1 X RC - ROD CLAMP
1 X R1000 - 1000mm CONNECTING RODS
2 X R500 - 500mm CONNECTING RODS
2 X R250 - 250mm CONNECTING RODS
2 X R125 - 125mm CONNECTING RODS
1 X CC - CONNECTING COLLAR
3 X SCS - CONNECTING STUD
1 X BM100 - 100mm BOWL MOUNT
1 X SR - STEPPER RING
3 X SC - SUPERCLAMP
6 X AB58 - ANGLE BRACKET

The Hague Multi Mount System 2 enables a variety of interchangeable components from Hague and Manfrotto to be used in various ways to mount a camera in a variety of positions that are sometimes difficult to reach. The MMS2 system includes the Hague triangular BM100 Bowl Mount to which a standard 100mm (or 75mm using the supplied stepper ring) video head can be attached with the camera. The bowl mount is then held in position using a combination of the Connecting Rods, Angle Brackets, Rod Clamp, Connecting Collar & Superclamps.

The Multi Mount 2 System is easy to use in a variety of situations and all the component parts have either a 5/8" (16mm) socket or stud which allows them to be used with other items that are part of our 5/8" range. Each Multi Mount Kit has been designed to include different items so you have a choice of kit depending on your requirements and the flexibility you require from your kit. If you then decide at a later date you require extra items these can be purchased individually. This makes it easy to grow the kit by adding additional items as required. Joining items together with the connecting rods of various lengths allows you to form a ridged platform to mount the camera on.

The following items are included with the Hague Multi Mount 2 (MMS2) kit and are compatible with the other Hague Multi Mount systems as well. Please note that all of these items are also available to purchase as individual items and that the items included in each kit do vary. 

THE FOLLOWING ITEMS ARE INCLUDED IN THE HAGUE MULTI-MOUNT SYSTEM KIT 2

1 x Rod Clamp (RC)
The Rod Clamp enables two connecting rods to be held together to either adjust the length of the two rods, to change direction or to brace across the rods.

7 x Connecting Rods (1 x R1000, 2 x R500, 2 x R250 & 2 x R125) 
The Connecting Rods are available at 4 different lengths from 125mm, 250mm, 500mm and 1000mm. 

1 x Connecting Collar (CC)
The Connecting Collar enables two 5/8" (16mm) male studs to be held together, such as holding two connecting rods together.
 

3 x Connecting Stud (SCS)
The Connecting Stud enables the Angle Bracket to fastened to a Superclamp.

1 x 100mm Bowl Mount (BM100)

The 100mm Bowl Mount enables a *Pro-Pan & Tilt Head with a 100mm claw ball (*sold separately) to be fastened to the mount and has the facility to "level off" the head. At the corners of the triangle plate are 5/8" (16mm) male studs to attach the Angle Bracket. 

1 x Stepper Ring (SR)
The Stepper Ring enables a Pan & Tilt Head with a 75mm levelling system to be used on the 100mm Bowl Mount. 

3 x Superclamp (SC)
The Superclamp can be attached to a pole, tube, bench or table. Its jaws will attach to any pole between 12 to 55mm in width or table edge between 12 to 30mm. It can be fixed either vertically or horizontally and has a 5/8" (16mm) female socket.

6 x Angle Bracket (AB58)
The Angle Bracket has two 5/8" (16mm) female sockets with locking handle. It is used to connect the rods to the triangle mount. 

Price does not include the video head or the camera. 

58a.jpgThis item is part of our 5/8” (16mm) range. All items with the 5/8” logo displayed have either a male stud or a female socket that is 5/8” (16mm) and this makes them compatible with other items within this range. Please note that male studs are only compatible with female sockets and vice versa.