Saramonic AX107 Active XLR Audio Adapter For DSLR

£195.00
(Inc. Tax)
£162.50
(Ex. Tax)
(No reviews yet) Write a Review
SKU:
SRAX107
Shipping:
Calculated at Checkout

The Saramonic SR-AX107 is a 2-channel XLR audio adaptor with pre-amplifiers and phantom power, ideal for use with any DSLR camera with a built in microphone jack. A wide variety of audio devices such as professional condenser microphones, wireless microphones, external audio mixers, sound boards etc may be connected to the camera using this adaptor.

The SR-AX107 makes recording work much easier. The Level Meter enables the user to verify the proper input levels in real time.

The output signal can be adjusted by the level controls for optimum recording. The headphone jack enables monitoring of sound from the adaptor during recording, or from the camera during playback. The AGC disable feature reduces noise during quiet periods of recording. 

Key Features:

1. 2-channel XLR audio adaptor with pre-amplifiers and phantom power, ideal for use with any DSLR camera with a built in microphone jack

2. Isolating transformer which provides noise free sound

3. Two balanced XLR inputs, one Monitor input jack. One stereo 3.5mm (1/8”) Mini-Jack output

4. Optional 12 or 48 volt phantom power for condenser microphones that require phantom power to operate.

5. AGC DSBL: Camera Auto Gain Control will increase the gain to maximum level; the AGC Disable function reduces the hiss when the camera is recording during quiet moments.

Specifications:

Inputs - Two balanced XLR inputs. One Monitor input jack

Output - One stereo 3.5mm (1/8”) Mini-Jack output

Control Knobs - Left and Right Control Knobs adjust the signal of each channel to the optimum recording levels. Volume control knob adjusts the headphone volume level.

Mono/Stereo Switch - select mono or stereo output mode. The mono mode is for one mono microphone recording. It can send the mono audio signal to each channel and output stereo audio signal. The stereo mode is for two channels recording. It provides two separate channels of au

LINE/ MC/ PH Switches - Select LINE or MIC or Phantom levels

Level Meter - -18 to +3 dB in 3 dB increments

LED/ Peak Indicators - Switch on/off the LED signal indicators which flash red for overload

Gain Switch - Selects LO for unity gain or HI for +20dB boost

MONITOR - Headphone jack to monitor the audio from microphones or camera

AGC - On/ Off Switch

AGC DSBL - Camera Auto Gain Control will increase the gain to maximum level; the AGC Disable function reduces the hiss when the camera is recording during quiet moments.

Input Level - 3 dBu / +14dBu

Output Level - Nominal MIC levels

THD - Less than 0.01% @ 1 kHz, -30dBu input

S/N Ratio - 85 dB @ 1 kHZ, - 30dBu input

Gain - 0 dB / 20 dB

Phantom Power - Dual regulated 12 or 48 V power supplies. Current to 14 mA (direct short)

Dimensions - 152 x 95 x 44mm

Weight - 0.51Kg

Box Contents - SR-AX107 main unit, signal transmission line x 1, AV cable x 1, user manual, warranty card