The Hague AMP2 Highshot Camera Mast kit provides the user with a fully wireless set-up with a motorized powerhead and your camera controlled via a tablet, phone or computer. This kit is ideal for people who own a compatible camera and wish to have a completely wireless set-up for the powerhead and camera control.
The AMP2 Highshot Camera Mast kit comprises of the Hague 7.3m Highshot Mast, the Hague 360° Powerhead, the Camranger Wireless Camera Controller and the PT Hub wireless powerhead unit. This mast kit is an ideal solution for aerial mast photography, sports analysis, site surveys and sports filming, but you must have a camera that is compatible with the Camranger wireless camera controller so please check the compatibility list below.
Canon DSLR Camera Support
SL1 / 100D | Xsi / 450D | T1i / 500D | T2i / 550D | T3i / 600D | T4i / 650D |T5i / 700D | T6i/T6s / 750D/760D |
40D | 50D | 60D | 70D | 80D | 7D | 7D II | 6D | 5D II | 5D III | 5DS/5DSr | 1Ds III | 1D III | 1D IV | 1Dx | 1DC | 1Dx II
Nikon DSLR Camera Support
D5000 | D5100 | D5200 | D5300 | D5500 | D90 | D7000 | D7100 | D7200 | D300 |D300S |
D500 | D600 | D610 | D700 | D750 | D800 | D800E | D810 | D3 | D3s | D3x |D4 | D4s | D5 | Df
Made from lightweight aluminium this mast is extremely portable, quick to set-up and easy to use. With its own tripod style base, which remains attached at all times and just folds up for transport, the mast provides a rigid base and each section of the mast can be raised easily by hand.
At the top of the mast there is a standard 1/4” screw attachment to which you attach the Hague Powerhead and then the supplied tilt correction plate allows you to achieve a greater tilt angle. Once the camera is attached you can then connect up the PT Hub and the Camranger device which will generate a WiFi signal to connect to your tablet, phone or laptop.
Once everything is connected you can then control the direction of the powerhead and the functionalities of the camera via your tablet/phone/laptop from the base of the mast. For full details of the camera functionalities that can be controlled via the Camranger application please see the full Camranger specifications link below.
Operating from a higher view point drastically changes the picture you can capture and these masts can be utilised outdoors or indoors depending upon the application they are needed for. The legs have holes in the base so pegs can be used on soft ground and there is an attachment at the top to secure guide ropes if required.
This AMP2 kit includes the Hague AMP Highshot Camera Mast, the Hague 360° Powerhead, the Hague Tilt Correction Plate, the Camranger Wireless Camera Controller and the PT Hub.
Maximum Mast Height – 7.3m (24ft)
Retracted Mast Height – 170cm (5.6ft)
Weight – 11kg
Mast Material – Lightweight Aluminium
Powerhead Power Source – 4 x AA Batteries
Vertical Tilt Angle - 30 degrees when used with tilt correction plate
Vertical Tilt Max Speed – Approx 2.4 degrees per sec
Vertical Tilt Min Speed – Approx 1.2 degrees per sec
Horizontal Pan Max Speed – Approx 8 degrees per sec
Horizontal Pan Min Speed – Approx 4 degrees per sec
Maximum Payload – 2.5kg
Camranger Specifications – Click Here
PT Hub Specifications – Click Here
Hague Camera Supports | Nottingham | England