The Junior Jib Camera Crane by Hague Camera Supports is ideal for video cameras & DSLR cameras under 3kg in weight. The two section crane attaches directly to your camera tripod and then allows you to create smooth jib shots through the booms pulley system and bearing block. As with all of the Hague jibs it is well made and affordable too.
HAGUE CAMERA SUPPORTS PRODUCT DESCRIPTION
The Hague K2 Junior Jib is a lightweight camera crane which is quick and easy to set up. It fastens directly to the head of any sturdy tripod and is suitable for camera set-ups that weigh up to 3kg. With a smooth camera tilt control you can achieve stunning shots with ease.
The camera attaches directly to the jib arm's camera plate and is secured with the thumb screw supplied. There is an attachable counterbalance arm complete with weights, plus an adjustable fine trim weight.
The jib has a variable tilt control with lock, which enables you to tilt the camera 90 degrees and the camera can be set in any position, so you can have the camera pointing directly downwards or upwards creating some very unusual shots.
The new design has a much greater vertical crane movement, which means the camera can go from ground level to over 7ft.6" (2.3m) high and you can pan the jib arm 360 degrees. There is also a jib lock, should you require to leave the camera at a set height.
The K2 Junior Jib attaches directly to the tripod camera plate and can be secured with both the standard 1/4" and 3/8" screws that come supplied with tripod plates.
The Hague Junior Jib can be set up with the camera mounted on either side for left or right hand control and this is also helpful if using a camera with a flip out screen. The user can then monitor the shots either via the camera screen or from an external monitor or tablet with mounting brackets available as optional extras for both scenarios.
Supports up to 3kg.
Vertical crane movement 2.3m.
Pan Radius 126cm.
Transit Size 144cm x 15cm x 12cm.
Fits to any sturdy tripod.
Price includes - The Hague K2 Junior Jib with tilt control and counterbalance weights.
Optional extras, which may be shown in pictures/videos but are not included in the price, include the camera, the Manfrotto tripod, the monitor bracket (MB/A), the monitor and any other accessories shown. Please see below for recommended accessories which includes the BCA Balance Correction Adaptor for DSLR cameras.
Designed and manufactured by Hague Camera Supports | Nottingham | England